MSMA2 Ph Call 6012)-7102620

http://ift.tt/1MSLe3T Telephone call 6012-7102620 Manual Saliran Mesra Alam Malaysia (or MSMA), or in English the Urban Stormwater Management Manual for Malaysia is the urban drainage design standard first published by the Department of Irrigation and Drainage Malaysia (D.I.D) in 2000. Compliance with the requirements of MSMA when designing drainage system is required legally of all engineers in Malaysia. The Department of Irrigation and Drainage has completely referred to as the first edition of MSMA (also known as MSMA1) with the release of the second edition (known as MSMA2) about 11 years after its first edition. There are a lot of differences in the second edition include (taken from case studies done for Kuala Lumpur): 10 out of the 14 rainfall stations in Kuala Lumpur have its design rainfall gone up by up to 125%. The design flow using the Rational Method has gone up by up to 130% for commercial and city area. For a factory lot in Kuala Lumpur the Site Storage Requirement for On-Site Detention has gone up by up to 233%. The storage of a detention pond has gone up by up to 130%. The differences between the first and the second editions of MSMA give rise to the hike in the magnitudes of the main design parameters as follows: Longer storm data covering 100 more storm stations in Peninsular Malaysia. The rainfall intensities for most ARI's have increased. Compared to the first edition where it was divided into east and west coast of the Peninsula for the computation of the temporal pattern, West Malaysia is now divided into 5 regions. The dissimilar hydrograph peaks and shapes caused by the differences in temporal patterns. Not affected by rainfall durations and intensities, and whether a catchment is urban/rural in condition, the coefficient of runoff in the Rational Method is now set according to the types of landuse. This gives rise to differences in the estimated peak flow. The differences in the rainfall intensites, temporal patterns and the loss model used all affected the Time-Area Method in the second editon. For Kuala Lumpur it is noticed that the rainfall intensities have increased and the temporal pattern is more peaky, thus giving rise to a more peaky flow hydrograph. The Approximate Swinburne Method in the second editon gives higher Site Storage Requirement (SSR) than the Swinburne Method in the first edition. MSMA2 used the approximate method based on a set of approximation tables and this has resulted in an over estimation of the SSR's. The storage of a detention pond has gone up using the second editon compared to the first edition because of the rise in the rainfall intensities, temporal patterns and the selection of loss rate. In view of the many differences in computational methods between the first and second editions of MSMA, a tool is developed to help engineers to perform the computations using both editions precisely and to allow comparison be made of their differences quickly. The tool is a drainage design software developed for MSMA. The software is written by Ir. Dr. Quek Keng Hong- a practising engineer in Malaysia. MSMAware also includes more than a dozen rainfall stations and their temporal patterns in the East Malaysian state of Sarawak. MSMA2 : 00:00:05 MSMA2 00:00:05 MSMA software 00:00:06 MSMA workshop 00:00:07 MSMA training 00:00:08 MSMA seminar https://www.youtube.com/watch?v=61AgP_ky_9E MSMA2 Ph Call (6012)-7102620
Click here for more info...

Department of Irrigation and Drainage Malaysia Ph Call 6012)710 2620

http://ift.tt/1MSLe3T Phone call 6012-710-2620 The stormwater drainage design standard first released by the Department of Irrigation and Drainage Malaysia in 2000 is the Urban Stormwater Management Manual or the Manual Saliran Mesra Alam (referred to as MSMA). Fullfilment of the requirements of MSMA when designing drainage works is required legally of all engineers in Malaysia. More than ten years after its first publication, DID has completely amended the first edition of MSMA (referred to as MSMA1) with the publication of the second edition (referred to as MSMA2). There are a lot of alterations in the second edition include (taken from case studies completed for Kuala Lumpur): 10 out of the 14 storm stations in Kuala Lumpur have its design storm risen by up to 124%. The design flow using the Rational Method has risen by up to 129% for commercial and city area. For a factory lot in Kuala Lumpur the Site Storage Requirement for On-Site Detention has risen by up to 233%. The volume of a detention pond has risen by up to 129%. The differences between the first and the second editions of MSMA resulted the hike in the magnitudes of the main design parameters below: Longer rainfall data covering 100 more storm stations in Peninsular Malaysia. This results in higher storm intensities for certain durations and Average Recurrence Intervals. Compared to the first edition where it was divided into east and west coast of the Peninsula for the determination of the storm temporal pattern, Peninsular Malaysia is now grouped into 5 regions. The different hydrograph peaks and shapes due to the differences in temporal patterns. The coefficient of runoff in the Rational Method is now fixed according to the types of landuse, and not influenced by storm durations and intensities, and whether a catchment is urban/rural in condition. This resulted in differences in the estimated peak flow. The Time-Area Method in the second editon is affected by the differences in the storm intensites, temporal patterns and the loss model used. For Kuala Lumpur it is noticed that the storm intensities have increased and the storm temporal pattern is more peaky, thus giving rise to a more peaky flow hydrograph. The Approximate Swinburne Method in the second editon resulted in higher Site Storage Requirement (SSR) than the Swinburne Method in MSMA1. MSMA2 used the approximate method based on a set of approximation tables and this has resulted in an over estimation of the SSR's. Compared to MSMA1, the increase in the storm intensities, temporal patterns and the choice of loss rate have given rise to a rise in the volume of a detention pond using MSMA2. In view of the many differences in computational methods between the first and second editions of MSMA, a tool is developed to help engineers to perform the computations using both editions precisely and to allow comparison be made of their differences speedily. The tool is a urban drainage design software designed for MSMA. Ir. Dr. Quek Keng Hong- a practising professional engineer in Malaysia is the programmer of the software. MSMAware also covers the East Malaysian state of Sarawak where more than a dozen storm stations and their temporal patterns are included into the software. DEPARTMENT OF IRRIGATION AND DRAINAGE MALAYSIA : 00:00:05 Department of Irrigation and Drainage Malaysia 00:00:06 MSMA2 00:00:07 MSMA software 00:00:08 MSMA workshop 00:00:09 MSMA training https://www.youtube.com/watch?v=zlgZeffO90c Department of Irrigation and Drainage Malaysia Ph Call (6012)710 2620
Click here for more info...

MSMA2 Ph Call 6012)-7102620

MSMA2 Ph Call (6012)-7102620

http://msmaware.com/blog/manual-saliran-mesra-alam-malaysia-msma-software-program-tool/
Telephone call (6012)-7102620

In 2000 the Department of Irrigation and Drainage Malaysia first issued the stormwater drainage design standard known as the Urban Stormwater Management Manual for Malaysia or the Manual Saliran Mesra Alam Malaysia, MSMA. It is compulsory for all engineers in Malaysia to build drainage works to fullfil the requirements of MSMA. The Department of Irrigation and Drainage has completely revised the first edition of MSMA (also known as MSMA1) with the publication of the second edition (known as MSMA2) about Eleven years after its first edition. There are many changes in the second edition including the following (taken from case studies completed for Kuala Lumpur):

The design storm has increased by up to 126% for ten out of the fourteen rainfall stations in Kuala Lumpur.
The design flow using the Rational Method has increased by up to 131% for commercial and city area.
For a factory site in Kuala Lumpur the Site Storage Requirement for On-Site Detention has increased by up to 233%.
Detention basin has increased by up to 128% in the volume.

The changes between the first and the second editions of MSMA resulted the increase in the values of the main design parameters below:

Longer rainfall data covering 100 more storm stations in Peninsular Malaysia. The rainfall intensities for most ARI's are higher.

Compared to the first edition where it was divided into east and west coast of the Peninsula for the determination of the rainfall temporal pattern, Peninsular Malaysia is now divided into five regions. The dissimilar hydrograph peaks and shapes caused by the changes in temporal patterns.

Not dependent on storm durations and intensities, and whether a catchment is urban/rural in condition, the coefficient of runoff in the Rational Method is now set according to the types of landuse. Changes in the estimated peak flow is the result .

The Time-Area Method in MSMA2 is affected by the changes in the storm intensites, temporal patterns and the loss model used. For Kuala Lumpur it is noted that the storm intensities have increased and the rainfall temporal pattern is more peaky, thus resulting in a more peaky flow hydrograph.

The Site Storage Requirement (SSR) based on the Approximate Swinburne Method in MSMA2 is higher than that using the Swinburne Method in the first edition. The approximate method in MSMA2 has caused an over estimation of the Site Storage Requirements.

The volume of a detention basin has increased using MSMA2 compared to the first edition because of the rise in the storm intensities, temporal patterns and the choice of loss rate.

A software program Is built to help engineers to carry out the computations using both editions precisely and to allow comparison be made of their changes speedily, in view of the many changes in computational methods between the first and second editions of MSMA. The tool is a stormwater design software developed for MSMA. The software is programmed by Ir. Dr. Quek Keng Hong- a professonal engineer in Malaysia. MSMAware also covers the East Malaysian state of Sarawak where more than a dozen storm stations and their temporal patterns are included into the software.


https://www.youtube.com/watch?v=61AgP_ky_9E
https://www.youtube.com/watch?v=61AgP_ky_9E
https://www.youtube.com/watch?v=61AgP_ky_9E
MSMA2 Ph Call (6012)-7102620








https://www.youtube.com/watch?v=AWB_c_Jo4pg

Department of Irrigation and Drainage Malaysia Ph Call 6012)710 2620

Department of Irrigation and Drainage Malaysia Ph Call (6012)710 2620

http://msmaware.com/blog/manual-saliran-mesra-alam-malaysia-msma-software-program-tool/
Phone (6012)710 2620

The Urban Stormwater Management Manual for Malaysia or the Manual Saliran Mesra Alam (MSMA) is the urban drainage design procedure first released by the Department of Irrigation and Drainage Malaysia in early 2000. It is compulsory for all engineers in Malaysia to build drainage system to comply with the requirements of MSMA. The Department of Irrigation and Drainage has completely referred to as the first edition of MSMA (or MSMA1) with the publication of the second edition (known as MSMA2) about Eleven years after its first edition. Based on the case studies completed for Kuala Lumpur, there are a lot of differences in the second edition including the following:

10 out of the 14 rainfall stations in Kuala Lumpur have its design rainfall gone up by up to 125%.
The design flow using the Rational Method has gone up by up to 131% for commercial and city area.
For a factory lot in Kuala Lumpur the Site Storage Requirement for OSD has gone up by up to 233%.
Detention basin has gone up by up to 128% in the storage volume.

The changes between the first and the second editions of MSMA give rise to the hike in the values of the main design parameters below:

135 stations in Peninsular Malaysia with longer rainfall record. This results in higher rainfall intensities for certain durations and Average Recurrence Intervals.

West Malaysia is now separated into 5 regions for the computation of the rainfall temporal pattern, compared to the first edition where it was divided into east and west coast of the Peninsula. The different hydrograph peaks and shapes caused by the changes in temporal patterns.

Not dependent on rainfall durations and intensities, and whether a catchment is urban/rural in condition, the coefficient of runoff in the Rational Method is now established according to the types of landuse. Changes in the estimated peak flow is observed .

The changes in the rainfall intensites, temporal patterns and the loss model used all influenced the Time-Area Method in MSMA2. The rainfall intensities for Kuala Lumpur have increased and the rainfall temporal pattern is more peaky, resulting in a more peaky flow hydrograph.

The Approximate Swinburne Method in MSMA2 gives higher Site Storage Requirement (SSR) than the Swinburne Method in MSMA1. MSMA2 used the approximate method based on a set of approximation tables and this has resulted in an over estimation of the Site Storage Requirements.

Compared to MSMA1, the increase in the rainfall intensities, temporal patterns and the selection of loss rate have resulted a rise in the storage volume of a detention basin using MSMA2.

A software tool Is developed to help engineers to carry out the computations using both editions accurately and to allow comparison be made of their changes quickly, due to the many changes in computational methods between the first and second editions of MSMA. The tool is a urban drainage design software designed for MSMA. The software is created by Ir. Dr. Quek Keng Hong- a practising engineer in Malaysia. MSMAware also covers the East Malaysian state of Sarawak where more than a dozen rainfall stations and their temporal patterns are included into the software.


https://www.youtube.com/watch?v=zlgZeffO90c
https://www.youtube.com/watch?v=zlgZeffO90c
https://www.youtube.com/watch?v=zlgZeffO90c
Department of Irrigation and Drainage Malaysia Ph Call (6012)710 2620








https://www.youtube.com/watch?v=61AgP_ky_9E

Urban Stormwater Management Manual training Call 6012 710-2620

http://ift.tt/1PFJNLZ Ph (6012)710 2620 The stormwater drainage design standard first issued by the Department of Irrigation and Drainage Malaysia in 2000 is the Urban Stormwater Management Manual for Malaysia or the Manual Saliran Mesra Alam (also known as MSMA). It is required by law for all engineers in Malaysia to design drainage system to fullfil the requirements of MSMA. The Department of Irrigation and Drainage has completely revised the first edition of MSMA (also known as MSMA1) with the publishing of the second edition (or MSMA2) about Eleven years after its first edition. There are numerous changes in the second edition including the following (based on case studies done for Kuala Lumpur): The design rainfall has gone up by up to 126% for ten out of the 14 rainfall stations in Kuala Lumpur. For commercial and city area, the design flow using the Rational Method has gone up by up to 129%. For a factory lot in Kuala Lumpur the Site Storage Requirement for OSD has gone up by up to 235%. Detention pond has gone up by up to 129% in the storage. The differences between the first and the second editions of MSMA give rise to the rise in the values of the main design parameters as follows: Longer storm data covering 100 more rainfall stations in Peninsular Malaysia. The rainfall intensities for most ARI's are higher. Peninsular Malaysia is now separated into 5 regions for the computation of the rainfall temporal pattern, compared to previously where it was divided into east and west coast of the Peninsula. The differences in temporal patterns give rise to different hydrograph peaks and shapes. Not influenced by rainfall durations and intensities, and whether a catchment is urban/rural in condition, the coefficient of runoff in the Rational Method is now determined according to the types of landuse. This resulted in differences in the estimated peak flow. The Time-Area Method in the second editon is affected by the differences in the rainfall intensites, temporal patterns and the loss model used. For Kuala Lumpur it is noted that the rainfall intensities have increased and the rainfall temporal pattern is more peaky, thus giving rise to a more peaky flow hydrograph. The Approximate Swinburne Method in the second editon resulted in higher Site Storage Requirement (SSR) than the Swinburne Method in MSMA1. The approximate method in the second editon has given rise to an over estimation of the SSR's. Compared to MSMA1, the increase in the rainfall intensities, temporal patterns and the choice of loss rate have resulted an increase in the storage of a detention pond using the second edition. In view of the many differences in computational procedures between the first and second editions of MSMA, a tool is developed to help engineers to perform the computations using both editions precisely and to allow comparison be made of their differences quickly. A drainage design software is created for MSMA. The software is written by Ir. Dr. Quek Keng Hong- a practising professional engineer in Malaysia. MSMAware also includes more than a dozen rainfall stations and their temporal patterns in the Sarawak. URBAN STORMWATER MANAGEMENT MANUAL TRAINING : 00:00:05 Urban Stormwater Management Manual training 00:00:06 Department of Irrigation and Drainage Malaysia 00:00:08 MSMA2 00:00:09 MSMA software 00:00:11 MSMA workshop Urban Stormwater Management Manual training Call 6012 710-2620
Click here for more info...

Urban Stormwater Management Manual training Call 6012 710-2620

Urban Stormwater Management Manual training Call 6012 710-2620

http://msmaware.com/blog/urban-stormwater-management-manual-for-malaysia-software-program/
Call 6012-710-2620

The urban drainage design standard first printed by the Department of Irrigation and Drainage Malaysia in 2000 is the Urban Stormwater Management Manual or the Manual Saliran Mesra Alam (or MSMA). Compliance with the requirements of MSMA when building drainage works is required legally of all engineers in Malaysia. More than ten years after its first publication, DID has completely revised the first edition of MSMA (or MSMA1) with the publishing of the second edition (or MSMA2). With reference to the case studies done for Kuala Lumpur, there are numerous changes in the second edition including:

Ten out of the 14 rainfall stations in Kuala Lumpur have its design storm increased by up to 126%.
For commercial and city area, the design discharge using the Rational Method has increased by up to 130%.
The Site Storage Requirement for On-Site Detention for a factory site in Kuala Lumpur has increased by up to 234%,
The storage volume of a detention pond has increased by up to 130%.

The differences between the first and the second editions of MSMA give rise to the increase in the values of the main design parameters as follows:

Longer storm data covering 100 more storm stations in Peninsular Malaysia. This results in higher rainfall intensities for certain durations and ARI's.

West Malaysia is now separated into five regions for the derivation of the temporal pattern, compared to the first edition where it was divided into east and west coast of the Peninsula. The differences in temporal patterns give rise to dissimilar hydrograph peaks and shapes.

Not dependent on storm durations and intensities, and whether a catchment is urban/rural in condition, the coefficient of runoff in the Rational Method is now set according to the types of landuse. Differences in the estimated peak discharge is observed .

The Time-Area Method in the second editon is affected by the differences in the storm intensites, temporal patterns and the loss model used. For Kuala Lumpur it is noticed that the storm intensities have increased and the temporal pattern is more peaky, thus giving rise to a more peaky discharge hydrograph.

The Site Storage Requirement (SSR) based on the Approximate Swinburne Method in the second editon is higher than that using the Swinburne Method in the first edition. The approximate method in the second editon has resulted in an over estimation of the SSR's.

The storage volume of a detention pond has increased using the second editon compared to the first edition because of the increase in the storm intensities, temporal patterns and the selection of loss rate.

In view of the many differences in computational methods between the first and second editions of MSMA, a tool is developed to help engineers to carry out the computations using both editions precisely and to allow comparison be made of their differences speedily. A urban drainage design software has been created for MSMA. The software is written by Ir. Dr. Quek Keng Hong- a professonal engineer in Malaysia. MSMAware also covers the East Malaysian state of Sarawak where more than a dozen storm stations and their temporal patterns are included into the software.





Urban Stormwater Management Manual training Call 6012 710-2620








https://www.youtube.com/watch?v=zlgZeffO90c

Urban Stormwater Management Manual software Call 6012)710 2620

http://ift.tt/1PFJNLZ Ph Call 6012 710-2620 Manual Saliran Mesra Alam (referred to as MSMA), or in English the Urban Stormwater Management Manual for Malaysia is the stormwater drainage design procedure first published by the Department of Irrigation and Drainage Malaysia (D.I.D) in 2000. Compliance with the requirements of MSMA when building drainage system is required legally of all engineers in Malaysia. 11 years after its first publication, DID has completely revised the first edition of MSMA (or MSMA1) with the release of the second edition (or MSMA2). There are a lot of differences in the second edition including (taken from case studies completed for Kuala Lumpur): The design storm has risen by up to 126% for 10 out of the fourteen storm stations in Kuala Lumpur. For commercial and city area, the design discharge using the Rational Method has risen by up to 130%. For a factory site in Kuala Lumpur the Site Storage Requirement for On-Site Detention has risen by up to 234%. The storage volume of a detention pond has risen by up to 130%. The hike in the magnitudes of the main design parameters as described above can be due to the differences between the first and the second editions of MSMA as follows: Longer rainfall data covering 100 more stations in Peninsular Malaysia. The storm intensities for most Average Recurrence Intervals have increased. Peninsular Malaysia is now divided into 5 regions for the derivation of the rainfall temporal pattern, compared to the first edition where it was divided into east and west coast of the Peninsula. The differences in temporal patterns give rise to dissimilar hydrograph peaks and shapes. Not dependent on storm durations and intensities, and whether a catchment is urban/rural in condition, the coefficient of runoff in the Rational Method is now determined according to the types of landuse. This resulted in differences in the estimated peak discharge. The Time-Area Method in the second editon is affected by the differences in the storm intensites, temporal patterns and the loss model used. For Kuala Lumpur it is noted that the storm intensities have increased and the rainfall temporal pattern is more peaky, thus giving rise to a more peaky discharge hydrograph. The Approximate Swinburne Method in the second editon gives higher Site Storage Requirement (SSR) than the Swinburne Method in the first edition. The approximate method in the second editon has given rise to an over estimation of the Site Storage Requirements. Compared to the first edition, the increase in the storm intensities, temporal patterns and the choice of loss rate have caused a rise in the storage volume of a detention pond using the second edition. In view of the many differences in computational procedures between the first and second editions of MSMA, a tool is developed to help engineers to carry out the computations using both editions accurately and to allow comparison be made of their differences quickly. A drainage design software has been designed for MSMA. Ir. Dr. Quek Keng Hong- a practising engineer in Malaysia is the programmer of the software. MSMAware also covers the East Malaysian state of Sarawak where more than a dozen storm stations and their temporal patterns are included into the software. URBAN STORMWATER MANAGEMENT MANUAL SOFTWARE : 00:00:05 Urban Stormwater Management Manual software 00:00:06 Urban Stormwater Management Manual training 00:00:07 Department of Irrigation and Drainage Malaysia 00:00:09 MSMA2 00:00:10 MSMA software Urban Stormwater Management Manual software Call (6012)710 2620
Click here for more info...

Urban Stormwater Management Manual software Call 6012)710 2620

Urban Stormwater Management Manual software Call (6012)710 2620

http://msmaware.com/blog/msma-drainage-design-software/
Phone call (6012)710 2620

The Urban Stormwater Management Manual for Malaysia or the Manual Saliran Mesra Alam (MSMA) is the urban drainage design guideline first published by the Department of Irrigation and Drainage Malaysia in early 2000. Engineers in Malaysia are required by law to design drainage system to fullfil the requirements of MSMA. Eleven years after its first publication, DID has completely updated the first edition of MSMA (or MSMA1) with the publishing of the second edition (or MSMA2). There are a lot of differences in the second edition including (taken from case studies completed for Kuala Lumpur):

The design rainfall has gone up by up to 126% for ten out of the fourteen rainfall stations in Kuala Lumpur.
The design discharge using the Rational Method has gone up by up to 131% for commercial and city area.
For a factory lot in Kuala Lumpur the Site Storage Requirement for OSD has gone up by up to 234%.
The storage of a detention pond has gone up by up to 130%.

The rise in the values of the main design parameters as described above can be due to the differences between the first and the second editions of MSMA as follows:

Longer storm data covering 100 more stations in Peninsular Malaysia. This gives rise to in higher rainfall intensities for certain durations and Average Recurrence Intervals.

Compared to previously where it was divided into east and west coast of the Peninsula for the determination of the storm temporal pattern, Peninsular Malaysia is now separated into 5 regions. The differences in temporal patterns give rise to dissimilar hydrograph peaks and shapes.

The coefficient of runoff in the Rational Method is now fixed according to the types of landuse, and not dependent on rainfall durations and intensities, and whether a catchment is urban/rural in condition. Differences in the estimated peak discharge is observed .

The Time-Area Method in MSMA2 is affected by the differences in the rainfall intensites, temporal patterns and the loss model used. The rainfall intensities for Kuala Lumpur have increased and the storm temporal pattern is more peaky, giving rise to a more peaky discharge hydrograph.

The Approximate Swinburne Method in MSMA2 gives higher Site Storage Requirement (SSR) than the Swinburne Method in MSMA1. The second editon used the approximate method based on a set of approximation tables and this has resulted in an over estimation of the Site Storage Requirements.

Compared to MSMA1, the increase in the rainfall intensities, temporal patterns and the choice of loss rate have caused a rise in the storage of a detention pond using the second edition.

A software program Is developed to assist engineers to carry out the computations using both editions precisely and to allow comparison be made of their differences speedily, in view of the many differences in computational methods between the first and second editions of MSMA. A stormwater design software has been developed for MSMA. The software is programmed by Ir. Dr. Quek Keng Hong- a professonal engineer in Malaysia. MSMAware also contains more than a dozen rainfall stations and their temporal patterns in the Sarawak.





Urban Stormwater Management Manual software Call (6012)710 2620












https://www.youtube.com/watch?v=71qMGqu9pYI

Urban Stormwater Management Manual for Malaysia Tel 6012)-7102620

http://ift.tt/1MXX7sS Phone 6012 710 2620 The stormwater drainage design standard first issued by the Department of Irrigation and Drainage Malaysia in 2000 is the Urban Stormwater Management Manual for Malaysia or the Manual Saliran Mesra Alam Malaysia (MSMA). Engineers in Malaysia are required legally to build drainage works to comply with the requirements of MSMA. 11 years after its first publication, DID has completely updated the first edition of MSMA (MSMA1) with the release of the second edition (MSMA2). Taken from the case studies completed for Kuala Lumpur, there are numerous changes in the second edition include: ten out of the fourteen storm stations in Kuala Lumpur have its design rainfall gone up by up to 126%. The design discharge using the Rational Method has gone up by up to 131% for commercial and city area. The Site Storage Requirement for On-Site Detention for a factory site in Kuala Lumpur has gone up by up to 235%, The storage of a detention pond has gone up by up to 130%. The increase in the values of the main design parameters as described above can be due to the differences between the first and the second editions of MSMA as follows: Longer rainfall data covering 100 more storm stations in Peninsular Malaysia. This gives rise to in higher storm intensities for certain durations and Average Recurrence Intervals. Compared to previously where it was divided into east and west coast of the Peninsula for the computation of the rainfall temporal pattern, West Malaysia is now separated into five regions. The differences in temporal patterns give rise to different hydrograph peaks and shapes. Not dependent on rainfall durations and intensities, and whether a catchment is urban/rural in condition, the coefficient of runoff in the Rational Method is now set according to the types of landuse. This gives rise to differences in the estimated peak discharge. The Time-Area Method in the second editon is affected by the differences in the rainfall intensites, temporal patterns and the loss model used. For Kuala Lumpur it is noted that the rainfall intensities have increased and the rainfall temporal pattern is more peaky, thus giving rise to a more peaky discharge hydrograph. The Site Storage Requirement (SSR) based on the Approximate Swinburne Method in the second editon is higher than that using the Swinburne Method in MSMA1. MSMA2 used the approximate method based on a set of approximation tables and this has resulted in an over estimation of the SSR's. Compared to MSMA1, the increase in the rainfall intensities, temporal patterns and the choice of loss rate have resulted a rise in the storage of a detention pond using MSMA2. In view of the many differences in computational methods between the first and second editions of MSMA, a tool is developed to help engineers to perform the computations using both editions accurately and to allow comparison be made of their differences quickly. The tool is a urban drainage design software designed for MSMA. The software is written by Ir. Dr. Quek Keng Hong- a practising professional engineer in Malaysia. MSMAware also covers the East Malaysian state of Sarawak where more than a dozen rainfall stations and their temporal patterns are included into the software. URBAN STORMWATER MANAGEMENT MANUAL FOR MALAYSIA : 00:00:05 Urban Stormwater Management Manual for Malaysia 00:00:06 Urban Stormwater Management Manual software 00:00:08 Urban Stormwater Management Manual training 00:00:09 Department of Irrigation and Drainage Malaysia 00:00:11 MSMA2 Urban Stormwater Management Manual for Malaysia Tel (6012)-7102620
Click here for more info...